Loading ...
Loading ...
Loading ...
If the contact area is too high on the valve, the seat must
be lowered using a 32˚ flat cutter.
If the contact area is too lower on the valve, the seat
must be raised using a 60˚ interior cutter.
Valve Seat Refacing
Valve seat cutters, grinders, or equivalent valve seat
refacing equipment are recommended to correct worn
valve seat.
Follow the refacing manufacturer’s instructions.
y Contact area (too high or too low)
– Reface the valve seat.
The valves cannot be ground, If a valve face is burned
or badly worn or if it contacts the seat unevenly, replace
the valve.
(1) ROUGHNESS
Engine servicing
4-29
4-29
45º
32º
32º
60º
60º
1
Loading ...
Loading ...
Loading ...