Loading ...
Loading ...
Loading ...
Service data
2-5
2-5
Engine
Item Q’ty
Thread
Dia. (mm)
Torque
N•m (kgf•m / lbf•ft)
Remarks
Transmission oil drain bolt 1 8 22 (2.2 / 16) Note 1
Engine oil drain bolt 1 8 22 (2.2 / 16) Note 1
Right crankcase cover joint pipe 1 18 18 (1.8 / 13) Note 2
Timing hole cap 1 14 7 (0.7 / 5.1) Note 3
Bearing set plate socket bolt 4 6 9.8 (1.0 / 7) Note 4
Bearing set plate screw 2 6 12 (1.2 / 9) Note 4
Bearing set plate flat screw 2 6 9.8 (1.0 / 7) Note 4
Cylinder head sealing bolt 1 12 32 (3.3 / 24) Note 4
Cylinder head mounting nut 2 9 39 (4.0 / 29) Note 1
Cylinder head joint pipe 1 18 18 (1.8 / 13) Note 2
Vacuum port joint 1 5 2.5 (0.25 / 1.8)
Primary drive gear special bolt 1 12 108 (11.0 / 80) Note 1
Flywheel nut 1 18 167 (17.0 / 123) Note 1
Cam chain tensioner bolt 1 6 12 (1.2 / 9) Note 4
Valve clearance adjusting nut 4 6 14 (1.4 / 10) Note 1
Injector holder socket bolt 2 6 9.8 (1.0 / 7)
Fuel hose banjo bolt (holder side) 1 18 24 (2.4 / 17.7)
Water pump impeller 1 7 12 (1.2 / 9)
Clutch oil bleeder screw 1 8 6 (0.6 / 4.3)
Clutch spring bolt 6 6 12 (1.2 / 9)
Clutch center lock nut 1 18 69 (7.0 / 51) Note 1
Drive sprocket UBS bolt 1 8 31 (3.2 / 23)
Shift drum center special bolt 1 8 22 (2.2 / 16) Note 4
Shift drum stopper arm bolt 1 6 12 (1.2 / 9)
Shift return spring pin 1 8 22 (2.2 / 16)
Ignition pulse generator bolt 2 5 5.4 (0.55 / 4.0) Note 4
Stator mounting bolt 3 5 5.4 (0.55 / 4.0) Note 4
Spark plug 1 10 16 (1.6 / 12) Note 2
Notes: 1. Apply clean engine oil to the threads and seating surface.
2. Apply sealant to the threads.
3. Apply grease to the threads.
4. Apply a locking agent to the threads.
Cylinder stud bolt:
Insulator band (cylinder head side):
Exhaust pipe stud bolt:
Insulator band (throttle body side):
101,5±1mm
17±0,5mm
7±1mm
7±1mm
Torque Values
Standard
Item
Torque
N•m (kgf•m / Ibf•ft)
5 mm bolt and nut 5 (0.52 / 3.5)
6 mm bolt and nut 10 (1.0 / 7)
8 mm bolt and nut 22 (2.2 / 16)
10 mm bolt and nut 33 (3.4 / 25)
12 mm bolt and nut 53 (5.4 / 40)
5 mm screw 4 (0.42 / 3)
6 mm screw and flange bolt (SH type) 9 (0.9 / 7)
6 mm flange bolt and nut 12 (1.2 / 9)
8 mm flange bolt and nut 26 (2.7 / 20)
10 mm flange bolt and nut 38 (3.9 / 29)
Loading ...
Loading ...
Loading ...