Loading ...
Loading ...
Loading ...
Operating instructions
1-6
1-6
Throttle Grip
Throttle Grip Free Play
Standard throttle grip free play is approximately 3 mm
(0.12 in) of grip rotation.
Adjustment is made with the integral throttle cable
adjuster.
Slide the dust cover off from the integral cable adjuster.
Turning the adjuster in direction “A” will decrease free
play and turning it in direction “B” will increase free play.
Tighten the lock nut after adjustment.
Operate the throttle grip to ensure that it functions
smoothly and returns completely in all steering position.
(1) DUST COVER (A) DECREASE
(2) LOCK NUT (B) INCREASE
(3) ADJUSTER
(1) ADJUSTER
(2) LOCK NUT
Front brake lever
The front brake lever free play can be adjusted by turning
the adjuster.
Free play must be adjusted to provide 0.5 – 1.5 mm
(0.019 – 0.060 in) clearance between the end of the ad-
juster and the front brake master cylinder piston.
y To reduce free play, turn the adjuster clockwise, then
tighten the lock nut securely.
y To increase free play, turn the adjuster counterclockwi-
se, then tighten the lock nut securely.
If brake lever feels soft or spongy, there is probably air in
the brake system and it must be bled.
NOTICE
Do not adjust the end of the adjuster and the front brake
master cylinder piston below 0.5 mm (0.019 in).
(1) FRONT BRAKE LEVER
(2) FREE PLAY
Front brake lever free play
Standard front brake lever free play should be
between 0.5 – 15 mm (0.019 – 0.60 in).
NOTICE
Do not adjust the free play of the lever to less than 5 mm
(0.196 in).
2
1
1
2
1
A
B
2
3
Loading ...
Loading ...
Loading ...