Loading ...
Loading ...
Loading ...
(1) 5P CONNECTOR (1) QUICK CONNECTOR PROTECTOR
1. Insert a new pawl into the quick connector. Insert the
quick connector into the fule pump feed hose until it
clicks. If it is hart to insert, apply a small amount of
engine oil to the fuel pump feed hose.
2. Pull on the quick connector to check that it does not
come out and is firmly connected.
Fuel Feed Hose
Disassembly / Installation
The pawl of the connector must be changed every time
the fuel feed hose is disconnected.
Disassembly of fuel pump side
Turn off the engine.
Remove the rear fender
Pull up the fuel tank
Disconnect the fuel pump’s 5P connector.
Turn on the engine until it stops.
1. Remove the protective covering from the quick con-
nector.
2. Check whether the connector is dirty and clean if ne-
cessary. Cover the quick connector with a cloth.
3. Hold the quick connector with one hand and squeeze
the tabs with the other to release the connector. Pull
the connector apart.
(1) TABS
(2) QUICK CONNECTOR
(1) PAWL
(2) QUICK CONNECTOR
(1) PAWL
(2) QUICK CONNECTOR
4-4
4-4
Engine servicing
1
1
1
2
2
1
2
1
Loading ...
Loading ...
Loading ...