Loading ...
Loading ...
Loading ...
(1) MAINSHAFT
(2) COUNTERSHAFT
(3) SHIFT FORK SHAFTS
(4) LEFT SHIFT FORK
(5) RIGHT SHIFT FORK
(6) CENTER SHIFT FORK
Crankcase Combination
Clean the crankcase mating surfaces before assembling
and check for wear or damage.
If the minor roughness or irregularities on the crankcase
mating surfaces, dress them with an oil stone.
Lubricate the crankshaft bearing with engine oil.
Lubricate the transmission bearings with transmission oil.
Install the crankshaft into the right crankcase.
Install the mainshaft and countershaft as an assembly
into the right crankcase.
Install the center shift fork with its identification mark
facing in.
Install the right and left shift forks with their identification
marks facing out.
Install the shift drum.
Install the shift forks.
(1) OIL PUMP SHAFT
(2) INNER ROTOR
(3) OUTER ROTOR
(1) ONE-WAY REED VALVE
(1) DOWEL PINS
(2) NEW GASKET
Install the oil pump shaft, oil pump inner rotor and outer
rotors.
Install the dowel pins and new gasket.
(1) RIGHT CRANKCASE
(2) LEFT CRANKCASE
Install the one-way reed valve into the right crankcase.
Place the left crankcase onto the right crankcase.
Engine servicing
4-59
4-59
1
2
1
2
3
1
1
2
2
1
4
3
3
5
6
1
Loading ...
Loading ...
Loading ...