Mitsubishi LT-46144 lcd television

User Manual - Page 78

For LT-46144.

PDF File Manual, 88 pages, Download pdf file

Loading ...
Loading ...
Loading ...
78 Appendices
Appendix E: Troubleshooting,
Side Panel Lock
Release
System Reset
To re-enable the side- o When Energy Mode is set to Fast
panel controls after Power On, press and hold the MENU
activation of the Side button on the side panel for over
Panel Lock eight seconds.
When Energy Mode is set to Low
Power, press POWERon the side
panel to turn on the TV. Wait for TV
to turn on, then press and hold the
MENUbutton on the side panel for
over eight seconds.
If the TV does not turn on Press the SYSTEMRESETbutton on the side
or off, does not respond
to the remote control or
side panel buttons, or
has audio but no video.
Allows the side panel controls to
be unlocked if the remote control is
misplaced.
i......................................................................................................................................
The TV will turn off and the blue LED
)anel with a pointed object such as the will flash quickly for about one minute.
point of pencil or end tip of a paperclip. When the blue LED stops flashing,
you may turn on the TV. The changes
you made most recently, before using
SYSTEMRESET,may be lost. Changes
you made previously, however, are
not lost.
TV Reset To reset all consumer- 1. While viewing the TV, press MENUto The TV will start the initialization
IMPORTANT: accessible settings display the TV Main menu.
Use this reset and all memories to the
2. With the Main menu displayed,
only if all other original factory defaults, press number keys 1 2 3 to display
resets have been
unsuccessful. CAUTION: All owner- the Reset menu.
performed setups and 3. READ THE ON-SCREEN Parental Lock Pass code will remain
adjustments will be WARNING AND INSTRUCTIONS. unaffected, but all other memories
erased. If you do not wish to use this and settings outlined in this Owner's
reset, press EXITor MENUto back Guide will need to be set again.
out.
If you do wish to use the reset,
press ENTERto erase all memo-
ries and settings.
process. The TV will then turn off
and the front blue LED will start
flashing. When the LED stops
flashing (approx. 1 min.), you
can turn the TV on again. The
Loading ...
Loading ...
Loading ...