Loading ...
Loading ...
Loading ...
20 3. TV Connections
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel #2 to
the HDMI device output. HDMI devices provide video
and audio through the single cable.
Mitsubishi recommends you use category 2 HDMI
cables to connect HDMI 1.3 source devices. High-
speed category 2 cables bring you the full benefits of
Deep Color and x.v.Color. See chapter 1, "TV Overview,"
for more on HDMI cable types.
BACK INPUT PANEL #2
_elow laDeEwltnEn recesseo area - at _oo
Required: S-Video cable and left/right analog stereo
audio cables.
1. Connect the cable from the outside cable or satel-
lite service to CABLE iN or SATELLITE iN on the
cable box or satellite receiver.
2. Connect an S-Video cable from S-VIDEO OUT on
the cable box or satellite receiver back panel to
iNPUT S-VIDEO on the TV back panel #1.
3. Connect left (white) and right (red) audio cables
from AUDIO OUT on the cable box or satellite
receiver to iNPUT AUDIO L (MONO) and R on the TV
back panel #1.
Note: Refer to the cable box or satellite receiver
Owner's Guide for cable or dish antenna con-
nections to the receiver.
TV Back Panel#1
TV Back Panel#2
HDMi Device
Figure 2. Connecting an HDM! device.
Note: HDMI inputs are 5implayWD certified for proper
interoperability with other products certified by
Simplay TM,
SATELLITE IN
m
incoming
Cable from
Wail
AriEl S-Viyeo Device
Figure 3. Connecting a device with S-Video
Loading ...
Loading ...
Loading ...