Loading ...
Loading ...
Loading ...
Appendices 77
TV Reset Comparison Guide
You can resolve many common TV problems using the
reset functions described in the following table. See
also the additional troubleshooting suggestions later in
this appendix.
iMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from ANT 1, ANT 2, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Format
PerfectColor TM
and PerfecTint TM
Reset
(for the single
input currently
being watched)
When the picture shape Press the FORMATkey to cycle through the The last-used format for a signal
seems incorrect, use available formats to find the best format type is memorized for each input.
FORMATto change the for the current picture. The next time the same input and
shape of the picture, the same signal type is viewed, the
last-used format will be recalled.
When the color intensities 1. While viewing the input to be reset, All PerfectColor/PerfecTint sliders
seem out of balance, press MENUto display the Main are reset to the original center
position. The PefectColor/PerfecTint
use the PerfectColor/ menu with the A/V icon highlighted.
PerfecTint reset to reset settings for other inputs remain
the color balances to the 2. Use _" to highlight PerfectColor unchanged.
original factory settings, and press ENTERto display the Note: PerfecTint sliders are avail-
Both PerfectColor and PerfectColor adjustment screen, able only on model LT-40134.
PerfecTint and are reset 3. Press CANCELto reset the colors.
at the same time.
A/V Memory When audio and/or video 1. While viewing the input to be reset, All Video and all Audio (except
Reset settings for a single input press MENUto display the Main Balance, Listen To, & Language)
(for the single seem incorrect use A/V menu with the A/V icon highlighted, settings for an individual input
input currently Memory Reset to return are reset. In addition, two global
being watched) the input to the original 2. Use b" to highlight the Reset icon settings (Video Noise & SharpEdge)
factory settings, and press ENTERto reset, are reset to their original factory
settings.
A/V Reset To reset audio and While viewing the TV, press the side All Audio and Video settings are
(for all inputs) video adjustments for panel buttons GUIDEand FORMATat the returned to their original factory
ALL inputs back to their same time. settings.
original factory settings.
iiii
Channel To erase and re- 1. While viewing the TV, press MENUto All previously memorized channels
Memorization memorize channels on display the Main menu. for the selected antenna input are
ANT 1 or ANT 2. 2. Press Y to highlight the Setup icon. erased and a new set of memorized
3. Press _" to highlight the Scan icon. channels is created. All custom
4. Press V to highlight the antenna settings for Fav, channel names, and
channel locks are deleted. To add or
input and reception mode, e.g. delete individual channels, see Edit
ANT t Air.
................ menu instructions in chapter 5, "TV
b. _'ress _ to ntgnllgm _ne _ar_ Menu Settin s"
g
button icon and press ENTERto start
..........................................................................................................................the memorization.
Lock Menu Pass To change your Lock See the cutout page in Appendix B. Allows a new code to be
Code menu pass code established.
Loading ...
Loading ...
Loading ...