Loading ...
Loading ...
Loading ...
3. TV Connections 23
Required: Two-way RF splitter, 3 coaxial cables, right
and left analog audio cables, either S-video or video
cable.
1. Connect the incoming cable or antenna to IN on the
RF splitter.
2. Connect one coaxial cable from OUT on the RF
splitter to ANTENNA IN on the VCR back panel.
3. Connect one coaxial cable from OUT on the RF
splitter to ANT l/MAIN on the TV back panel #2.
This allows you to use TV Guide Daily (model
LT-40134 only).
4. To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO
OUT on the VCR to INPUT AUDIO L (MONO) and
AUDIO R on the TV back panel #1. If your VCR is
mono (non-stereo), connect only the white (left)
cable.
5. Connect either an S-Video or composite video
cable from VIDEO OUT on the VCR back panel to
INPUT VIDEO or S-VIDEO on the TV back panel #1.
Connect only one type of video cable; S-Video is
recommended, if available.
TV Back Panel #1
BACK INPUT PANEL #2
(below label within recessed area - at top
I_0_"1 : Attach only one typeof
I T I video cable. S=video
recommended if
available.
5.
)EO
i! ΒΈ@ ilii
g_
TV Back Panel #2
t
Incoming"
VCR back panel
ANTENNA AUDIO
Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable
Loading ...
Loading ...
Loading ...