Loading ...
Loading ...
Loading ...
TVConnections
@,
Before you Begin
The TV's Auto Input Sensing feature automatically rec-
ognizes most connections and prompts you to identify
the type of device connected. See chapter 2, "TV
Setup," for more on Auto Input Sensing.
Review the connection types available on your input
devices and use inputs that will give the best video
quality. For example, choose HDMI over component
video, and choose component video over S-video or
composite video.
For best picture quality, route signals directly from the
source device to the TV; avoid routing video signals
through an A/V receiver, for example.
soundOuo!ity
For best audio quality, route audio signals from the
source device directly to your A/V receiver or sound
system whenever possible.
HDTV !
If your cable box or satellite receiver has an HDMI
output, use the connections for HDMI devices
described later in this chapter.
Required: RCA component video cables, left/right
analog stereo audio cables.
1. Connect the cable from the outside cable or satel-
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver. See your device's
owner's guide for instructions and cable compat-
ibility.
2. Connect RCA-type cables from the Y Pb Pr
outputs on the HDTV cable box or satellite receiver
to COMPONENT iNPUTS on the TV back panel
#1, matching the colored green, blue, and red
connections.
3. Connect left (white) and right (red) audio cables
from the HDTV cable box or satellite receiver to
COMPONENT iNPUTS L (MONO) and R on the TV
back panel #1.
Note: To hear digital surround sound, connect the digita
audio output from your cable box or satellite re-
ceiver directly to your digital A!V receiver.
Figure 1. Connecting an external HDTV receiver with
component video connections
Loading ...
Loading ...
Loading ...