Loading ...
Loading ...
Loading ...
uuIf the Battery Is DeaduJump Starting Procedure
618
Handling the Unexpected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s stud bolt.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■
What to Do After the Engine Starts
1Jump Starting Procedure
The Vehicle Stability Assist
TM
(VSA®) system, Adaptive
Cruise Control (ACC) with Low Speed Follow, brake
system (amber), safety support and low tire pressure/
TPMS
*
indicators may come on in amber along with
a message in the driver information interface when
you set the power mode to ON after reconnecting
the battery.
Drive a short distance at more than 12 mph (20 km/
h). Each indicator should go off. If any do not, have
your vehicle checked by a dealer.
* Not available on all models
23 HR-V-313V06000_01.book 618 ページ ２０２２年４月４日 月曜日 午前１０時４９分
Loading ...
Loading ...
Loading ...