Loading ...
Loading ...
Loading ...
Continued
143
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
Controls
To temporarily deactivate the function:
1. Set the power mode to OFF.
2. Open the driver’s door.
3. Using the master door lock switch, operate
the lock as follows:
LockUnlockLockUnlock.
u The beeper sounds and the function is
deactivated.
To restore the function:
• Set the power mode to ON.
• Lock the vehicle without using the auto lock
function
• With the keyless remote on you, move out
of the auto lock function operation range.
• Open any door.
1Locking the doors and tailgate (Walk away auto lock®)
Under the following circumstances, the auto-lock
function will not activate:
• The keyless remote is inside the vehicle.
uThe beeper will not sound.
• The keyless remote is taken out of its operational
range before all the doors are closed.
uThe beeper will sound.
The auto lock function does not operate when any of
the following conditions are met.
• The keyless remote is inside the vehicle.
• A door, tailgate or the hood is not closed.
• The power mode is set to any mode other than
OFF.
• The keyless remote is not located within a radius of
about 5 feet (1.5 m) from the vehicle when you get
out of the vehicle and close the doors and tailgate.
Auto lock function operation stop beeper
After the auto lock function has been activated, the
auto lock operation stop beeper sounds for
approximately two seconds in the following cases.
• The keyless remote is put inside the vehicle through
a window.
• You are located too close to the vehicle.
• The keyless remote is put inside the tailgate.
If the warning beeper sounds, check that you are
carrying the keyless remote. Then, open/close a door
and confirm the auto lock activation beeper sounds
once.
23 HR-V-313V06000_01.book 143 ページ ２０２２年４月４日 月曜日 午前１０時４９分
Loading ...
Loading ...
Loading ...