Loading ...
Loading ...
Loading ...
30
Drilling the Pilot Holes and
Mounting the Oven
NOTE: Before drilling the pilot holes, make sure
the oven is pushed as far back into the opening as
it will go and is centered.
a. Drill through the mounting holes in front frame,
for the #8 screws provided.
The screws must be a
minimum of 6 mm (1/
4") from the front of
the cutout.
WARNING: Mounting screws
must be used. Failure to do so could
result in the oven falling out of the
cabinet, causing serious injury.
b. Secure the oven to cabinet with screws provided.
NOTE: If the cabinet is particle board, you must
use #8 x 19 mm (3/4”) particle board screws. These
may be purchased at any hardware store.
Important safety instructions.
Securing the Oven in the Opening
C
Instructions
Safety
Instructions
Operating
Instructions
Care
and Cleaning
Installation
Troubleshooting
Tips
Consumer
Support
Loading ...
Loading ...
Loading ...