Loading ...
Loading ...
Loading ...
|ill ir , : i {_= ' ' ,_,,
OPERATION
KNOW YOUR SNOW BLADE
READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW BLADE.
C£mpare the illustration below with your snow blacleto familiarize yourself with the various controls and their locations.
HANDLETUBE
LOCK RELEASE GRIP ASS'Y,
BLADE PIVOT ROD
BLADE
ADJU,I
SPRING
ANGLE
LOCK
BARS
BLADE SHOE
BLADE PIVOT SHAFT
EXTENSION
SPRING
LOCK RELEASE GRIP ASS'Y,
HANDLE TUBE
BLADE PIVOT ROD
ANGLE LOCK BARS,: :
BLADE ADJUST SPRING
BLADE SHOE
BLADE PIVOT SHAFT
EXTENSION SPRING
LIFT ROD
CONTROL CABLE
Unlocks the blade to swivel to the right and left.
Raises or lowers the blade and pivots blade to the right and left,
Connects blade to handle tube, Pivots blade to the right and left,
Locks the blade In either the right hand, left hand or straight ahead position,
Holds blade in position but permits it to pivot forward to pass over an obstruction.
Ground contacting part of blade. Adjusts for adequate ground clearance of blade.
Connects blade to channel assemb2y. Allows blade to pivot forward.
Makes blade easier to raise by helping to counter the weight of the blade.
Connects blade channel to the handle tube, Raises and lowers the blade.
Connects the look release lever to the angle lock bars.
HOW TO USE YOUR SNOW BLADE
To Lift or Lower the Snow Blade
• Use the handle grip located on the on the end of the
handletube. To raise the blade, pullback while pushing
down on the handle grip.To lower blade, pullbackwhile
lifting up on handle grip, See figure 30,
HANDLETUBE
PULL BACK AND
LIFT UP TO
LOWER BLADE
PULL BACK AND
PUSH DOWN TO
RAISE BLADE
To Pivotthe Blade
• Raise blade to transport position. Push the lock release
gripdownagainst the handle tube to unlocktheblade. To
pivot the blade, keep the grip depressed and push
forward or pullback onthe handle tube slidingitalong the
lift rod. Release the grip to lock the blade when it is in
either the right hand, the left hand or the straight ahead
position. See figure 31.
HANDLE TUBE
\
LOCK RELEASE
GRIP ASSEMBLY
ROD
FIGURE 30
FIGURE 31
1R
Loading ...
Loading ...
Loading ...