Loading ...
Loading ...
Loading ...
29
LCDI (Leakage Current Detection Interrupter) POWER CORD
Note:
The LCDI is a non-serviceable device. Damage caused by attempting to do the repair
yourself will void the warranty.
The unit is equipped with LCDI to monitor leakage current. Read the instructions printed on the
device for proper use and handling. The conductors inside the cord are surrounded by shields, which
are not grounded. Check the cord for damage regularly. If the device trips, fi nd the cause and correct
the fault before operating the unit.
TEST PROCEDURE
Follow the instructions to ensure that LCDI power cord works properly.
1. Plug the power cord into a grounded power outlet.
2. If the green power light is not on, press RESET bu on once.
The light should come on.
3. Press TEST bu on once, the power light should go o .
4. Press RESET bu on once again for use. The power light should come on.
5. If this test fails, do not use this device. Contact a qualifi ed technician.
Reset Buon
Test Buon
WARNING
To avoid fire, electric shock or malfunction:
Do not attempt to open the device.
Do not immerse in water.
Do not remove the ground prong.
Do not use the device beyond the recommended voltage.
Do not use the device if the shields become exposed.
Do not repeatedly push TEST and/or RESET buttons.
Loading ...
Loading ...
Loading ...