Loading ...
Loading ...
Loading ...
Note:
• Remove Front Cover after Front Door (p. 10) is opened.
Pull on both ends of the Front Cover O with your
fingertips to remove it.
/
/
Front Cover
3
4
(1) Turn the Lamp Cover Lock/Open Knob to the
left,
2) Pull the Lamp Cover out and down to open it.
Lamp Cover
Lock/Open Knob
_ _ _ _ -- Lamp Cover
(1) Turn the Lamp Unit Lock/Open Knob to the
left.
(2) Grasp the Lamp Unit Lock/Open Knob and
slowly remove the Lamp Unit as shown.
• The Lamp Unit is hot right after use and may cause
burns if touched.
• Please allow the Lamp Unit to cool before handling or
replacing it.
(1) Insert the new Lamp Unit being careful of the
insertion direction.
Press on the arrow mark to confirm proper
insertion:
(2) Turn the Lamp Unit Lock/Open Knob to the
right until it clicks.
Lamp Unit
Lock/Open Knob
Lamp Unit
Proper!y dispose of the old tamp. Please see page 64.
Secure the Lamp Unit and Lamp Unit housing door. If
they are not secured; a protective circuit wilt not allow the
!amp t° turn oni
, At this point, confirm that the Lamp Unit will not come out
by pulling On the Lamp Unit Lock/Open Knob.
Close the kamp Cover.
(2) Turn the Lamp Cover Lock/Open Knob to the
right.
Cover
Lock/Open Knob
Cover
65
Loading ...
Loading ...
Loading ...