Loading ...
Loading ...
Loading ...
Input the equipment's 4-digit
Remote Control code.
(p. 60-62)
Confirm the equipment with
the Remote Control.
• The external equipment turns
On.
Ii If the equipment does not operate with
Remote Control
When your eqUipment has a single code
_ InPutthe rem0te control code again
, When Y0Ur equipment has multiple codes
_ Change the code with step 4 above and test
aga n (p: 60-62)
Caution:
• Registrationwi!! fai! if the wrong code is input or it takes more
than 30 seconds to register.
You can operate other manufacturers' components using
this unit's Remote Control. This procedure searches all codes and is called the
"sequence method."
Connect the external devices to the Projection
Display and turn Off the external devices.
2 pOowER Press both buttons
simultaneously for more than
3 seconds.
• Release the buttons when the
equipment selection buttons
+ start flashing.
1
+
POWER
After step 3 above, change the
code and test store.
• Operate the equipment with the
Remote Control. (p. 59)
• Repeat until the code is found.
• It may take many attempts
before the correct code is found.
Select the equipment with the
equipment selection button.
• The selected button remains tit
(other buttons are not tit).
When the correct code is
found.
58
Loading ...
Loading ...
Loading ...