Loading ...
Loading ...
Loading ...
[] Select desired channel:
Press CH AT or NUMBER keys.
[] Adjust to desired volume level:
Press VOL _ orVOL 4.
Notes:
• The channel number and volume level are stored even after
the unit is turned off:
• Power consumption canbe reduced if the volume level is
lowered:
3Q ®
® ® ® Step
1
® ® ® 2
@ 3
4
5
4
(_) Direct Tuning Example
Channel Banner
Action
Display
Press 1 1
Press 5 15
Press - 15-
Press 1 15-1
Press OK 15-1
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub,channels within a single channel. When
tuning to a digita! channel, the unit will also tune to a
program and will indicate the channel and program in the
on:screen Channel Banner display.
In order to select channels properly, Auto program must
be performedl (p: 29)
Follow the procedure below to directly enter the channel
number using the NUMBER keys on the Remote
Control:
1 @ _ @ Press the NUMBER keys on the
Re2btee. CpO2tsrOltK.enterthe Channel
The following is an example of tuning
to channel 15.
Direct Tuning Example
2::
......_ Press 5 15
Press OK 15
• If, during channe! selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channe! is automatically selected.
I ¢ @: If tuning a digital channel and your
channel contains more than one
program, press PROG and enter
_) the program (1, 2,3 etc.)using the
NUMBER keys. Press OK. The
following is an example of tuning to
FF_OG channel 15-1.
®
Note:
• If. during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Press the Channel A T or RECALL button, except when
the MENU screen is displayed, to display current unit
status information.
Chart nN B er:
Press CH A T to minimize the
displayed channel banner. It will
display the channel number, and the
station identification (if available).
Channel Number
Station Identifier
Charl rl_ ;er"
RECALL Press RECALL to maximize the
channel banner.
Chalmel. Program and Station identifier
Program title
Closed lcture mo(
setting
SAP indication Signal resolution
nne remaining
in Sleep Timer
Aspect
33
Loading ...
Loading ...
Loading ...