Loading ...
Loading ...
Loading ...
Page 7
INSTALLATION AND ASSEMBLY – Prevailing Wind
CAUTION: Wind blowing into or across the rear oven lid vent can cause poor performance and/or
dangerous overheating. Orient the grill so that the prevailing wind blows toward the front of grill.
Windy Conditions
Your Sunstone™ charcoal grill is specially designed to draw fresh air in through the front drawer face, and
in direct to the interior burn trays. When grilling the hot gases are then released through the controlled
side hood vents, or through back of grill through a venting system. Using your grill in windy conditions may
disrupt the front-to-back air flow.
CAUTION: Any damage resulting from windy conditions causing overheating, including warping
of steel components. Also any discoloration from heat buildup, is excluded from warranty coverage.
NOTICE: Ensure grill is installed with proper air flow for correct combustion air and cooling
airflow. Airflow MUST be maintained for the grill to perform as it was designed. If airflow is blocked,
poor combustion will result.
Location
Locate the grill only in a well-ventilated area. Never locate the charcoal grill in a building, garage, shed or
other such enclosed areas without an approved ventilation system. During heavy use, the charcoal grill
will produce a lot of smoke while hood is up. Ensure there is adequate area for it to dissipate.
Loading ...
Loading ...
Loading ...