Loading ...
Loading ...
Loading ...
Below is completed base assembly.
A
C
B
A
ASSEMBLE CASTER SETS
Refer to Figures 7-11.
Tools Required: Two _" Open End Wrenches
Refer to Figure 7; remove casters (4) and supports (2)
from carton.
Figure 7
* Loosen and remove the bolt and hex nut from the bracket
(see Figure 8)
Figure 8
• Rotate foot pedal bar so that kick plate cam is inside
bracket (see Figure 9).
Figure 9 - Kick Plate Cams Inside the Brackets
• The kick plate cam must be underneath the caster to func-
tion properly (see Figure 10).
Figure 10
• Refer to Figures 10 and 11; place caster onto the bracket
and secure in position with bolt and hex nut.
= Repeat above steps for the second caster set.
Figure11
ATTACH CASTER SETS TO BASE
Refer to Figure 12.
ToolsRequired:5ram HexWrench
HardwareRequired: EightM8 x 16 socket pan head screws
(Hardwarebag #4).
• Attach one caster setto the two front cornersupports
using four M8 x 16 socketpan head screws.
• Attach the remaining caster setto the two rearcorner
supports.
Figure 12
Loading ...
Loading ...
Loading ...