Loading ...
Loading ...
Loading ...
• Never feed materiaI into the cutting tool from the rear of
the saw. An accident and serious injury could result.
THINK SAFETY
Safetyis a combinationof operatorcommonsense and alert-
ness at all times whenthe sawis beingused.
Neveruse another personas a substitutefor a table exten-
sion,or asadditionalsupportfor a workpiecethat is longeror
widerthanbasic saw table,or to assistin feeding, supporting
orpullingthe workpiece.
Do notpullthe workpiecethroughthe saw blade--position
your bodyat the infeedside of the guard;start and complete
the cutfrom that same side.This wil]require addedtablesup-
portfor longor wide workpiecesthatextendbeyond the
lengthorwidthof the sawtable.
CAUTION: Followsafetyinstructionsthat appear onthe front
of your saw.
Refer to Figure 2.
• Open shipping box. Remove all parts, except saw body,
from both styrofoam packing bases and set parts and top
base safely aside.
• Use utility knife to cut down the four corners of the ship-
ping box, fulIy exposing the bottom packing base.
• Cut away enough styrofoam from motor cover side of
packing base so that, with the aid of an assistant, you can
slide the saw body from the base.
CAUTION; Do not attempt assembly if parts are missing.
Use this manual to order replacement parts.
Check for shipping damage or missing parts. If any parts are
damaged or missing, call 1-800-266-9079 for replacement.
The table saw body comes assembled as one unit. Additional
parts which need to be fastened to the saw should be located
and accounted for before assembling:
A Extension Table (2)
B Dust Chute
C Front Rail (2)
D Rear Rail (2)
E Miter Gauge Assembly
F Blade Guard Assembly
G Caster Set (2)
H Table Insert
I Handwheel Assembly with Knob (2)
J Rip Fence Assembly
K Rubber Foot (4)
L Anti-kickback Pawl Assembly
M Line Cord Hooks (2)
N Brace
O Rip Fence Storage Hooks (2)
P Blade Guard Storage Hooks (2)
Q Push Stick Storage Hooks (2)
R Push Stick
S Base Panel (4)
T Corner Support (4)
Hardware Bag #1
M10 x 25 Socket Head Bolt (6)
M10 Lock Washer (6)
M10 Fiat Washer (6)
Hardware Bag #2
M8 x 28 Hex Head Bolt (8)
M8 x 25 Hex Head Bolt (8)
M8 x 20 Hex Head Bolt (4)
M8 Lock Washer (20)
M8 Flat Washer (20)
M8 Hex Nut (16)
M8 Acorn Hex Nut (4)
Hardware Bag #3
M6 x 16 Hex Head Screw (2)
M6 Flat Washer (2)
M6 Hex Nut (2)
M6 Lock Washer (2)
Hardware Bag #4
MIO x 25 Socket Head Bolt (4)
M8 x 16 Socket Pan Head Screw (8)
M6 x 12 Socket Pan Head Screw (24)
M6 x 16 Socket Head Bolt (2)
M5 x 12 Socket Head Bolt (4)
M3 x 10 Pan Head Screw (4)
M10 Lock Washer (4)
M6 Hex Nut (2)
M5 Lock Washer (4)
M3 Lock Washer (4)
M10 Flat Washer (4)
M6 Flat Washer (2)
M5 Flat Washer (4)
M3 Flat Washer (4)
Hardware Bag #5
10/13mm Open End Wrench
4ram Hex Wrench
5mm Hex Wrench
8mm Hex Wrench
D
E
H
J
L
• O
R
Figure 2 - Unpacking
T7"
o
o
5
Loading ...
Loading ...
Loading ...