Loading ...
Loading ...
Loading ...
Basic Saw Operations (continued)
Ripping
Ripping is known as a cutting operation along the length
of the workpiece.
Position the fence to the desired width of rip and lock in
place
Before starting to rip, be sure:
1_Rip fence is parallet to sawblade..
2. Spreader' is properly aligned with sawblade.
3oAnti-kickback pawls are functioning properly.
When ripping long boards or' large panels, always use a
work support. A simple support can be made by clamp*
ing a piece of plywood to a sawhorse.,
Always Support Long
Workpiece_,J
kickback, push forward only--]
WARNING:
To avoid
on the part of the workpiece that will pass between I
the blade and the fence.
/
Keep your hands out of the blade path. •
Feed the workpiece by pushing forward only on the part
of the workpiece that will pass between the blade and the
fence.
Stop the thumb of your' outside hand at the front edge of
the table. Finish the cut with the appropriate push stick or
push block°
Blade Path
Stop Outside
Here \
Once the trailing end is on the table:
When "width of rip" is 2" or wider, use tile push stick to
finish the work all the way past the blade.
Width of Rip
28
Loading ...
Loading ...
Loading ...