Loading ...
FULL ONE YEAR WARRANTY ON CRAFTSMAN TABLE SAW
If within one year from the date of purchase, this Craftsman Table Saw fails due to a defect in material
or workmanship, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVICE
CENTER/DEPARTMENT THROUGHOUT THE UNITED SIATESo
This warranty applies only while this product is used in the United States,
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Sears, Roebuck and Co, D1817WA Hoffman Estates, IL, 60179
Safety Instructions For Table Saw
Safety Signal Words:
DANGER: means if the safety information is not followed
someone will be seriously injured or killed.
WARNING: means ff the safety information is not followed
someone could be seriously injured or killed.
CAUTION: means if the safety information is not followed
someone may be injured
Before Using The Saw:
WARNING: to avoid mistakes that could cause seri-_
ous, permanent injury, do not plug the table saw in I
until the following steps have been satisfactorily I
completed, J
• Completely assemble and align saw (See pages 8-18)
• Learn the use and function of the ON-OFF switch (See
page 13) blade guard, spreader; anti-kickback device,
miter gauge, rip fence, table insert, blade elevation and
blade tilt controls (See page 20)
• Review and understand ill safety insiructions and
operating procedures in this manual
• Review the maintenance methods for this saw (See
page 33-34)
• Find and read all the warning labels found on the saw
(shown beioW)o
kWARNING
• RaisedGuard
Can Drop On
Spinning
BladeAnd
Break
• Severe Injury
Can Result
. When Used,
Guard Must
BeDown In
Place
- Tighten
Spreader
Fasteners
BeforeUse
When Install!ng Or Moving The Saw:
Avoid dangerous environment,
• Use the saw in a dry, indoor place protected from rain_
Keep work area well lighted,
To avoid injury from unexpected saw movement,
o Belt or clamp the saw to firm level surface where there
is plenty of room to handle and properly support the
workpiece (See page 17-18).
o Support the saw so the table is level and the saw does
not mck_
oWhen using a table extension on any side of the saw,
prop up the outer end of the extension from the floor or
bench top to keep the saw from tipping/
° Put the saw where neither; operators nor bystanders
must stand in line with the sawblade.
• To avoid injury from electrical shock, make sure your
fingers do not touch the plug's metal prongs when
plugging in or unplugging the saw,
• Never stand on tool. Serious injury could occur if the
tool tips or you accidentally hit the cutting too! Do not
store any items above or near the tool where anyone
might stand on the toolto reach them
[_ DOUBLE INSULATED
When servicing use only identical replacement
parts
_kWARNING 1
1,Keepsawinteriorfreeofsawduetbuilduptoavoidfirehazard
2_Tightenbladeti_tlockleverbeforestarting saw,
_WARNING
I F_0td tttmt_tttt _t_lOtl UlIflg ItlW _ Wttltl tfpp_, U_ pU=h =ttCk wh_ tQr_ceIn set 2 [ncttel_ o1 8_ K_w h_W Io ,'edt=ce 1he d_k of k_:kbact<
2 W_l_*laf_tygoQgl_slh=blmNIANSlZ_7_ 5fc=mcho_'d_ morattombl_dm. S_lf|ttt, ltuc_olltJ |or_lp_lng,
3 DO _0! do _tochl_rtd cut_. 7 Whln rlpp_ng_use pu|h blt_ck nnd auxiliary f=no_ wh_ f_n¢_ 9 Do not reach _toull_ a_ ovlt sew hi,do.
4 Keep btld_ g_lt_d _aw_t i_ I_ pflc_ _o( |hro_gh Ct_ _l ea! belw_er_ 1t2 a/_f 2 [ll_h_ from bhK_. 1_ Tutti powlr o/f I_ Wilt for bl#d_ Io i|op befor_
5. Keep httttd_ 0_1 o_ p_ttt of _w btide. D_ _o_ tc_lke t_p ¢u_l rmrrowlr then f/2 _nch. =dJul_ln_ or Ii_l_lng_
2
Loading ...
Loading ...
Loading ...