Loading ...
Loading ...
Loading ...
Setting Oven Controls
Setting Self Clean
The Self Clean key controls the self clean feature. If you are
planning to use the oven directly after a self clean cycle
remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. So a 3 hour
self clean cycle will actually take about 4 hours to complete.
It is recommend to use a 2 hour self clean cycle for light soils, a
3 hour cycle for average soils, and a 4 hour cycle for heavier
soils.
To avoid possible burns use care when opening
the oven door after the self clean cycle, stand to the side of the
oven when opening the door to allow hot air or steam to escape.
When the oven is set for a self clean, do not force the oven door
open. This can damage the automatic door locking system. Use
caution and avoid possible burns when opening the door after
the self cleaning cycle has completed. The oven may still be
very hot.
To start an immediate self cleaning cycle or to set a delay start
time of 4:30 and shut-off automatically:
1. Be sure clock is set for correct time of day and door is
closed.
2. Press Upper or Lower Oven.
3. Press Self Clean. CIn will flash and 3:00 HR will show in the
display. Once in operation, the oven will automatically
clean for a 3 hour period (default clean cycle).
Note: If a 2 or 4 hour clean time is desired, press 2 0 0 for 2
hour or 4 0 0 for a 4 hour clean time.
Figure 38: Display showing the 3 hour self clean setting
4. Press _. The DOOR LOCKED icon will flash; CLEAN icon
and the letters Ckn will remain in the display.
5.
As soon as the control is set, the motor driven oven door
lock will begin to close automatically. Once the door has
been locked the DOOR LOCKED indicator light will stop
flashing and remain on. Also, the oven icon will appear in
the display.
Note: Allow 15 seconds for the oven door to lock.
If a delay Self Clean is desired, finish steps 6-9.
6. Press Delay Start.
Figure 39: Oven before setting delayed self clean cycle
Z Enter the start time numbers 4 3 0 and press s_. CLEAN,
DELAY, LOCK, and DOOR will be displayed.
Figure 40: Control setting to delay self clean until 4:30
8. The control will start the self cleaning at the set delay start
time.
Figure 41: Display showing a delayed self clean set
When the self clean cycle ends:
1. HOT will appear in the display. The time of day, the DOOR
LOCKED and CLEAN icon will remain in the display.
2. Once the oven has cooled down for approximately one
hour, and the DOOR LOCKED icon is no longer displayed,
the oven door can then be opened.
Stopping or Interrupting Self Clean
If it becomes necessary to stop or interrupt a self clean cycle
due to excessive smoke or fire in the oven:
1. Press @ "
2. The oven door can only be opened after the oven has
cooled down for approximately one hour and the DOOR
LOCKED icon is no longer displayed.
Note: If your clock is set for normal 12 hour display mode the
delayed self clean cycle can never be set to start more than 12
hours in advance. To set for delayed self clean cycle 12 to 24
hours in advance, set the control for the 24 hour time of day
display mode.
27
Loading ...
Loading ...
Loading ...