Loading ...
Loading ...
Loading ...
Setting Oven Controls
Setting the Clock
Q is used to set the clock. The clock may be set for 12 or 24
CLOCK
hour time of day operation. The clock has been preset at the
factory for the 12 hour operation. When the range is first
plugged in, or when the power supply to the range has been
interrupted, the time in the display will flash. Press (_. The
display will stop flashing.
Example - setting the clock for 1:30:
1. Press Q . CLO will appear in the display.
CLOCK
2. Press 1 3 0 keys to set time of day. Press
3. Time of day will now appear in the display.
Changing Between 12 or 24 Hour Time of Day Display
1. Press and hold Q until 12 Hr or 24 Hr appears in the
CLOCK
display.
2. Press Self Clean to switch between the 12 and 24 hour time
of day displays. The display will show either 12Hr of 24Hr.
Figure 11: Display showing norma 12 hour clock setting
Figure 12: Display showing 24 hour clock setting
3. Press _To accept the change or press_to reject.
4. Reset the correct time as prescribed in Setting the Clock
above.
Note: If the 24 hour time of day was selected, the clock will now
display time from 0:00 through 23:59 hours.
Setting Continuous Bake or 12 Hour Energy Saving
The Timer ON/OFF and Self Clean keys control the continuous
bake or 12 hour energy saving features. The oven control has a
factory preset 12 hour energy saving feature that shuts off the
oven control if left on for more than 11hours and 59 minutes.
The oven can be programed to override this feature for contin-
uous baking.
To set the continuous bake or 12 hour energy saving feature:
1. Press and hold Timer ON/OFF for about 7 seconds. The
dashes will change to show either 12Hr OFF or Stay On in
the display and the control will beep once.
Figure 13: Display showing 12 hour energy saving (top) and
display showing continuous operation that overrides energy
saving feature (bottom)
2. Press Self Clean to switch between the 12 hr energy saving
and continuous bake features.
Note: 12 Hr OFF indicates the control is set for the 12 hour
energy saving mode. Stay On indicates the control is set for the
continuous bake mode.
3. Press _ to accept your selection and the display will
return to show the time of day.
To Set Add 1 Minute
The Add 1Minute key is used to add 1 minute to an active timer.
If the timer is not active and Add 1 Minute is pressed, the timer
will turn on and begin counting down from 1 minute. This feature
will add 1 minute with each press of the key.
15
Loading ...
Loading ...
Loading ...