Loading ...
Loading ...
Loading ...
Setting Oven Controls
Setting Oven Timer
The Timer ON/OFF controls the timer and serves as an extra
timer that will beep when the set time has run out. It does not
start or stop cooking. The timer feature can be used during any
of the other oven control functions, except self clean and
Sabbath.
To set Timer for 5 minutes:
1. Press Timer ON/OFF. When dashes appear in the display
the number 5 key and press (sT_. The time will begin
press
to count down.
Note: If the start key is not pressed timer will return to time of
day after 25 seconds.
Figure 14: Display showing dashes (left) and timer ready to
accept desired time
2. When timer runs out, End and TIMER show in display. The
clock will beep three times every few seconds until Timer
ON/OFF is pressed. Press Timer ON/OFF to cancel the
timer at any time.
Setting Oven Lock
The o_ controls the oven lock. The oven lock automatically locks
LOCK
the oven door and prevents the locked oven from being turned
on. It does not disable the clock, timer, or the interior oven lights.
The ovens can be locked individually.
To activate the Oven Lock feature:
1. Select Upper or Lower Oven first.
2. Press and hold o_Nfor 3 seconds.
LOCK
3. After 3 seconds, DOOR, LOCKED will flash and Loc will
appear in the display.
Once the oven door is locked the DOOR and LOCKED indicator
will stop flashing and remain in the display. Allow 15 seconds for
the oven door to lock.
To reactivate normal oven operation by unlocking door:
1. Press and hold o_Nfor 3 seconds. Loc will disappear from
LOCK
the display. DOOR and LOCKED will flash in the display
until the door has completely unlocked and the oven will be
operational.
Note: Because the oven lockout can be set for one oven or two,
an unlocked oven may be used when the other is locked.
Setting Silent Control Operation
The Delay Start and Self Clean keys control the silent control
operation feature. The silent control operation feature allows the
oven control to be operated without sounds or beeps whenever
necessary. If desired the control can be programmed for silent
operation and later returned to operating with all the normal
sounds and beeps.
To change from normal sound to silent operation:
1. Press and hold Delay Start for 6 seconds. The display will
show dashes and then change to bEEP ON in the display.
Figure 15: Control setting for audible operation
2. Press Self Clean to switch between normal sound operation
and silent mode (beep off).
Figure 16: Control setting for silent operation
_ to accept the change or press _ to reject
3. Press the
change.
Note: The control will always beep at the end of a timer and will
beep when a set temperature has been reached, even if the
control is set to silent operation.
16
Loading ...
Loading ...
Loading ...