Loading ...
Loading ...
Loading ...
Setting Oven Controls
Restoring Factory Default Settings
Your appliance is programmed with default control settings.
Over time, users may make changes to these settings. The
following options have settings that can be modified and may
have been changed since the appliance was new:
• 12 or 24 hour display mode
• Continuous bake or 12 Hour Energy Savings mode
• Silent or audible control
• Oven temperature display (Fahrenheit or Celsius)
• Oven temperature adjustments (offsets)
Important: If you choose to restore factory default settings, all
of the listed user preferences will be restored to their original
settings (factory default).
To restore oven control to factory default settings:
1. When the oven is in idle and no cooking function is in oper-
ation, press and hold the 7 key until the acceptance tone
sounds (about 6 seconds)
2. Press START. The control is now reset to default settings.
Adjusting Oven Temperature
The temperature in the oven is pre-set at the factory. Before
adjusting, be sure to follow recipe times and temperatures. Test
a recipe by using a temperature setting higher or lower than the
recommended temperature. The baking results should help you
to decide how much of an adjustment is needed.
Important: Do not use thermometers such as those found in
grocery stores to check the temperature settings inside the oven.
These thermometers may display temperatures that vary greatly
from the actual temperature.
If you think the oven is cooking too hot or too cool for the
temperature you select, you can adjust the actual oven tempera-
ture to be 35°F (19°C) more or 35°F less than the default setting
of O.
To adjust the oven temperature higher by 30°:
1. Press Broil for 6 seconds. UPO 0 will appear in the display.
2. Press the numeric keys 30.
3. Press ('_ to accept the temperature change and the
v
display will return to the time of day. Press STOP to reject
the change if necessary.
To adjust the oven temperature lower by 30°:
1. Press Broil for 6 seconds. UPO 0 will appear in the display.
2. Press the numeric keys 30.
3. Press Self Clean to change the 30 to - 30.
4. Press(_ to accept the temperature change and the
display will return to the time of day.
5. Press STOP to reject the change if necessary.
25
Loading ...
Loading ...
Loading ...