Loading ...
Loading ...
Loading ...
PROTECTINGYOURNEWCOOKTOP
• Donotslidecookwareacrossyourcooktop.
• Do not use a dish towel orsponge to clean
or wipe down your cooktop.
• Do not use scouring powders or plastic,
nylon or metal cleaning pads on your
cooktop.
• Do not apply your cooktop cleaning creme
to the cooktop surface if the surface is hot.
• Read the instruction label on the cooktop
cleaning creme bottle before attempting to
clean the surface of your cooktop.
• Aftercleaning the cooktop surface, be sure
to wipe off any residue that may be left from
the creme with a dry paper towel.
• For major spills, turn the surface control
knob to OFF; use a dry paper towel to wipe
up spill, then use a razor scraper (held with
a potholder) at a 30" angle against the
surface of the cooktop to scrape remaining
spill from the hot cooking zone.
,, Do not cook directly on the surface of the
glass.
, Do not use the cooktop as a cutting board.
To remove the adhesive left from packaging
tape, use household dishwashing liquid,
mineral oil or cooking oil. With a soft cloth rub
into the area and allow to soak. Rinse and dry
well. Repeat procedure using an appliance
polish to insure no damage is done to the
oven. This should be done before the
range is turned on for the first time.
The tape cannot be removed once the
oven has heated.
Packaging tape can be found in the
following areas:
Cooktop surface
Door handle
Control panel area
Door trim
Oven area
r
_ AUTION:
When the surface controls are
turnedoff, the HotSurfacelndicator
light willremain lit until thecooktop
surface has cooled to approximately 150°F.
The glass ceramic surface will retain heat
afterthe indicator light goes out. Usecaution
until the cooktap surface has had time to
cool.
7
Loading ...
Loading ...
Loading ...