Loading ...
Loading ...
Loading ...
SELF-CLEANINGCYCLEcontinued
1. For best results, follow the steps i/.,
BEFORE A CLEAN CYCLE.
2. Slide the handle to the right
3. Turn the oven control knob to "CLEAN
The "LOCK DOOR" and "OVEN ON
indicator lights will glow.
Ifyou turn the oven control knob to CLEAN
and forget to lock the door, the "LOCK
DOOR" indicator light will flash, alerting
you to lock the door.
4. The clean cycle lasts 4 hours and 2(_
minutes. The "OVEN ON" and "LOCK
DOOR" indicator lights will blink at the end
of the clean cycle. The oven door cannot
be unlocked until the temperature ha_
cooled and the door handle slides easily to
the left.
5. After the cycle is finished, tum the oven
control knob to the off position and unlock
the door.
Turn the oven control knob to the off position.
'/nu wi!l need to wait for the oven temperature
, _drop be!owthe lock temperature (approx. 1
_ou_)before attempting to open the door. The
dicator light will not blink if the cycle is
interrupted.
After the cycle, you may
notice some white ash in
rite oven. Just wipe it up
with a damp cloth or
sponge.
/f white spots remain, scrub them with a
soap-filled steel wool pad. Be sure to rinse
thoroughly. These are usually deposits of salt
that cannot be removed during the cycle.
If for any reason you are not satisfied
with the cleaning results, just repeat
the cycle.
18
Loading ...
Loading ...
Loading ...