Loading ...
Loading ...
Loading ...
17.Disengagepowertotheauger/impeller
whensnowthroweristransportedor
not inuse.
18. Useonlyaftachmentsandaccessories
approvedbythemanufacturerofthe
snowthrower(suchastirechains,
electricstartkits,etc.).
19. Neveroperatethesnowthrower
withoutgoodvisibili.tyorlight.Always
be sureofyour footing, and keep a
firm hold on the handles. Walk; never
run.
MAINTENANCE AND STORAGE
1. Check shear bolts and otherbolts
frequently for proper tightness to be
sure the snow thrower isin safe
, working condition.
2. Never store the snow thrower with fuel
inthe fuel tank inside a buildingwhere
ignitionsources are present such as
hot water and space heaters, clothes
dryers, and the like. Allow the engine to
coolbefore storingin any enclosure.
3. Alway_Tefer to bperator's manual
instructionsfor importantdetails if the
snow thrower is to be stored for an
extended period.
4. Maintain or replace safety and instruc
tionlabels, as necessary.
5. Run the snow thrower a few minutes
after throwing snow to prevent freeze-
up Ofthe auger/impeller.
A
ZL_ WARNING: This snow thrower islor
use on sidewalks, driveways and other
ground level surfaces.
Caution should be exercised while using on
steep sloping surfaces. DO NOT USE
SNOW THROWER ON SURFACES
ABOVE GROUND LEVEL such as roofs of
residences, garages, porches or other such
structures or buildings.
Contents of Parts Bag (actual size)
I ° Owner's Manual (not shown)
2 - Parts Bags (not shown)
*Non-Assembly Parts, found
in tool box located on belt cover.
©
1-Washer, Hvsptlk
Q
1- Nut, 1/2-13Hexjam
*2 - Shear Pins
*2- Spare Spacers
1 - Starter Motor Cord 10Ft.
B©
3 -Hex Nylon Nuts,5116-18
4 -Flatwashers 11/32In.
1- Shifter
_1" Nut, 5/16-18 Reghex
4
Loading ...
Loading ...
Loading ...