Loading ...
Loading ...
Loading ...
TROUBLE CAUSE CORRECTION
Difficult starting Defective spark plug Replace defective plug
Water or dirt in fuel system Use carburetor bowl drain to
flush and refill with fresh fuel
Engine runs er- Blocked fuel lineor low on fuel Clean fuel line;check fuel sup°
ratically ply; add fresh gasoline (gaso:
line/oilmixture if2-cycle engine)
Engine stalls Unit runningon CHOKE Move choke lever to OFF position
Engine runs er- Water or dirtin fuel system Usa carburetor bowl drain to
ratically; flush and refillwith fresh fuel
or
Loss of power
Excessive Loose pads; damaged impeller
vibration
Units fails to
propel itself
Unit fails to
'discharge snow
Drive belt loose or damaged
Incorrect adjustment of auger con-
trolcable
Worn or damaged friction wheel
Auger ddve belt loose or dam-
aged
Auger controlcable not adjusted
correctly
Shear bolt broken
Discharge chute clogged
_ Foreign object lodged inauger
Stop engine immediately and
disconnect spark plug wire.
Tighten all bolts and make all
necessary repairs. Ifvibration
continues, have the unitser-
viced by a Craftsman service
repairman
Replace drive belt
Adjust traction drive cable
Repair friction wheel
Replace auger belt
Adjust auger controlcable
Replace with shear pin located
in tool box on belt cover.
Stop engine immediately and
disconnect spark plug wire.
Clean discharge chute and in-
side of auger housing.
Stop engine immediately and dis-
connect spark plug wire. Remove
object from auger.
23
Loading ...
Loading ...
Loading ...