Loading ...
Loading ...
Loading ...
snow blowing is accomplished when the •
snow is removed immediately after it
fails.
• Forcomplete snow removal, slightlyover-
lap each path previously taken. Use °
more overlap in deep snow toprevent
overloading.
• The snow should be discharged down
windwhenever possible. In windy condi-
tions, lower the chute deflector to direct
discharged snow close tothe ground,
where itis less likelyto blow intoun-
wanted areas.
• For normal usage, set the skids so that
tt)e scraper bar is 1/8" above the skids.
For extremely hard-packed snow sur-
faces, adjust the sldds upward so that the
scraper bar touches the ground.
• On gravel or crushed reck surfaces, set
the skids at 1-1/4" below the scraper bar
(See To Adjust Skids Height paragraph
on page 17). Stones and gravel must not
be picked up and thrown by the machine.
CUSTOMER RESPONSIBILITIES
After the snow throwing job has been
completed, allow the engine to idle for a
few minutes, which will melt snow and
accumulated ice off the engine.
Clean the snow thrower thoroughly after
each use.
Remove ice and snow accumulation and
all debris from the entire snow thrower,
and flush with water (if possible) to re-
move all salt or other chemicals. Wipe
snow thrower dry.
PRODUCT SPECIFICATIONS
HORSE POWER: 8.5 HP
)ISPLACEMENT: 19.34 cu. in.
,_ASOLINE CAPACITY: 4 quart
(unleaded)
OIL (26 oz. Capacity) : 5W-30
SPARK PLUG: Champion RJ19LM
(Gap .030) or
Equivalent
VALVE CLEARANCE: intake: .010 In.
Exhaust: .010 In.
SERVICE SCHEDULE
RECORDS
Fill in dates as INter Before As Every Every Each Before
yOU complete !flrat2 Each Needec 10 25 Season _toraga
regular service Hour= Usa Hour= Hour=
SERVICE
DATES
Che_k Engtne Oil Level y_ V,•
Change Engine Oil p,_ p,a
Tighten all screws and nuts
Check Traction1Clutch Cable /t jv_ P_
Adjustment (See cable Adj) V" ff
Replace Spark Plug p/
Oheck Ddve Belts
Lubricate all pivot p_nts _ V`_
Drain Fuel
Check Auger Clutch Cable
Adjustment (See Cable AdJ) rf p,1
Lubricate Disc Drive Plate Zerkl jvf
14
Loading ...
Loading ...
Loading ...