LG Electronics LTEL7337F LG 7.3 Cu. Ft. PrintProof Stainless Steel Smart InstaView Double Oven Slide-In Electric Range With ProBake Convection, Air Fry, And Air Sous Vide LTEL7337SS

User Manual - Page 25

For LTEL7337F.

PDF File Manual, 80 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
25OPERATION
ENGLISH
The Settings button allows you to:
set the hour mode on the clock (12 or 24 hours)
enable/disable convection auto conversion
adjust the oven temperature
activate/deactivate the preheating alarm light
set the beeper volume
switch the temperature scale between
Fahrenheit and Celsius
set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1 Press and hold the Start Time button for 3
seconds.
2 Press 1 to toggle between a 12-hour and 24-
hour clock.
3 Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 /
14 . This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 , and 325 shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1 Press and hold the Start Time button for 3
seconds.
2 Press Start Time repeatedly until Auto
appears in the display.
3 Press 1 to disable or enable auto conversion.
4 Press START to accept the change.
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven temperature
yourself.
To begin, either raise or lower the temperature
15 (8 ). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower
the temperature again, using the first
adjustment as a gauge. For example, if the
adjustment was too much, raise or lower the
temperature 10 (5 ). If the adjustment was
not enough, raise or lower the temperature 20
(12 ). Proceed in this way until the oven is
adjusted to your satisfaction.
1 Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until U_AJ or L_AJ appears in the
display.
U_AJ adjusts the upper oven and L_AJ
adjusts the lower oven.
2 Use the number buttons to enter the number
of degrees you want to adjust the oven
temperature.
3 Adjust the temperature either up or down by
pressing Start Time repeatedly to toggle
between plus (+) or minus (-).
4 Press START to accept the change.
NOTE
This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be increased (+) or
decreased (-) as much as 35 or 19 .
Once the temperature is increased or decreased,
the display shows the adjusted temperature
until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
1 Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until PrE appears in the display.
2 Press 1 to turn the light on/off.
Loading ...
Loading ...
Loading ...