Loading ...
Loading ...
Loading ...
EN
19
FULLY AUTO-PRESERVING COOKER
WITH TIME SWITCH
Two operating modes can be selected on the
timer starting from the OFF position (0).
(FULLY-) AUTO-PRESERVING COOKER
WITH DRAIN TAP
drinks into the cup or glass.
The spout can be removed to clean. Unscrew
the chrome-plated cap under the grip piece.
Only tighten the screwconnections by hand
during assembly.
Permanent operation
Turn the knob to permanent operation in an
anticlockwise direction. This switch position
warm for longer periods. There is no automatic
constantly.
Automatic operation
The clock has a total running time of 2 hours.
It monitors the required preservation time
and temperature together with the temperature
controller. The time set on the clock only
starts to count down when the preselected
temperature is reached i.e. the heat-up time is
not counted. The remaining preservation time
can be read from the knob at any time. Once
the time is over, the appliance automatically
The remaining time can be corrected using the
knob at any time.
If the temperature setting needs to be corrected
during the heat-up time, please proceed as
follows:
1. Turn the timer knob back to (0) and the
indicator lamp goes out
2. Reset the temperature controller to the
required temperature
3. Set the timer knob to the required
preservation time
Set the temperature controller (6) to the
required temperature. The appliance starts to
heat-up once the temperature controller is
time as soon as the required temperature
is reached. During the preservation time
that now starts, the set temperature is kept
almost constant by the temperature controller
switching the heating on for a short
time. This can be recognised by the indicator
lamp being illuminated.
Switching the appliance o
Turn the temperature controller (6) back fully
(in an anticlockwise direction). Also pull out the
plug after use.
SWITCHING THE APPLIANCE ON AND OFF
Loading ...
Loading ...
Loading ...