Loading ...
Loading ...
Loading ...
Adjustments
Arm Lock Adjusting Wheel
With the aml at an "'unindexed" position and
the miter lock applied, the locking action
should feel tight and secure.
Miter/Arm
Lock Lever
Considerable effort should be required to
move the arm back towards 0 °. Its is always
possible to force the arm because of the
leverage advantage the long arm provides.
However, the arm should resist moving
when a reasonable amount of force is
applied.
To check tbUow these steps:
1. Pull miter/arm lock forward to unlock and
rotate arm to approximately 30 ° left or right.
2. Lock miter/ann lock by pushing handle
toward rear of saw.
3. Apply pressure as shown above.
4. If the arm moves easily:
a. Unlock miter lock.
b. Locate the adjusting wheel as shown.
c. Turn wheel clockwise to tighten,
counterclockwise to loosen.
5. Repeal steps 1, 2, 3 above and readjust as
necessary.
Arm Lock
Adjusting Wheel
19
Loading ...
Loading ...
Loading ...