Loading ...
Loading ...
Loading ...
1
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and p indicator flashes twice on the remote control unit.
2
When “PRSET” appears on the remote control unit,
press ENTER.
3
When “DEVIC” appears on the remote control unit,
press the input source select button of the AV
equipment (CBL/SAT, Blu-ray, GAME, MEDIA PLAYER,
DVD, AUX1, AUX2 or CD) that you want to program for
the preset setting.
4
When “– – – – –” appears on the remote control unit,
press the number buttons 0 – 9 to enter a 5-digit code.
Press the buttons with an interval less than 30 seconds.
0
When the code is registered, “OK” flashes four times on the
remote control unit.
0
When the code is not registered correctly, “FAIL” or “CANCL”
flashes four times on the remote control unit. Perform from step 1
again.
0
Some manufacturers use more than one type of preset code. Preset codes to
change the number and verify correct operation.
0
To unregister the device from a button and reset to the default setting, set the AVR
code “73347” to the button.
NOTE
0
Depending on the model and year of manufacture of your device, some buttons
may not operate.
Contents Connections Playback Settings Tips Appendix
275
Front panel Display Rear panel Remote Index
Loading ...
Loading ...
Loading ...