Loading ...
Loading ...
Loading ...
Time programming function
Switching an element off
automatically
It is programmed as follows
Once the time has
elapsed
Correcting the time
Cancelling the
automatic OFF function
Recommendations and
warnings
This function may be used in two different ways:
- to switch an element off automatically
- as a timer
WARNING: The timer should not be used as a safety measure in order to leave the
cooktop unsupervised during use, especially at high temperatures. Breaded items
can smoke. Overheated food and oil can catch on fire. Supervise the cooktop even
if the time program is on.
Enter the time period for the required element. The element will switch off
automatically once this time has elapsed.
The cooktop must be switched on.
1. Select the element and heat setting required. Then press the Timer symbol.
The nn
uu, Min and __ indicators light up on the time programming function
display. The G indicator lights up on the selected element.
2. Program time using the 0 to 9 symbols.
I_! I_1
Timer
0 1 o \,,
\
\
\
,
Timer 0 1 2
After a few seconds, the programmed time will start to count down.
The last programmed cooking time will appear in the display.
The element switches off once this time has elapsed. You will hear a beep. The
indicators 0.0 and O0 light up. The indicators switch off and the display beep turns
off by pressing the Timer symbol.
Select the element and then press twice the Timer symbol. The min, __
indicators light up. Program time using the 0 to 9 symbols.
and -._
Select the desired element and then press twice the TIMER symbol. The min, __
and -._ indicators light up. Then press the 0 symbol until uunnis displayed.
To program a cooking time of less than 10 minutes, always press 0 before selecting
the required value. Any cooking time can be programmed up to 99 minutes. After a
loss in power, the time programming function will no longer be activated.
24
Loading ...
Loading ...
Loading ...