Loading ...
Loading ...
Loading ...
Note: ' The appearance of your oven control may differ slightly from the one illustrated below. Control Pad
However, all functions are the same. Also, push buttons or pads,may be shaped
differently than those appearing in this Use and Care Guide. Functions
READTHE INSTRUCTIONS CAREFULLY BEFOREUSING THE OVEN. Forsatisfactory useof
your oven, become familiar with the various functions of the oven asdescribedbelow.
baking mode
temperature.
BROIL-- Used'
to select the
OFF CANCEL PAD-- Used to clear
anyfunction previously entered
except the time of day and minute
timer. Push OFFCANCEL to stop
cooking. \
BAKEPAD-- o_
Used to
enter the normal _3SEC
iVo q
function.
CLEANPAD--
Used to
the self-cleaning
cycle.
UPand DOWN ARROWS PADS-- Used along with
the function pads to select oven temperature,
cooking time, stop time (when programming an
automatic stop time), time of day, clean time and
minute timer.
OVEN
PREHEAT
lID DOOR LOCKED
/
CLOCK PAD-- FEATURE
Used to setthe INDICATOR
time of day. LIGHTS--These
light to show
/ wh_ feature is
- / -./ I PAD--Used
____ _--4.._-. i toenterth_
[C_EO_K] fCOOE_ length ofthe
k--_J !-_M-._EJ i bakingtime
" P_ I (if equipped).
I _u_ STOPTIME
'm' I AD--Used..,
/ [ tOset the G_
/ I desired stop r-
[ J time for
baking. Can
be used with
BAKETIME to
/
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN" light will glow each
time the oven unit turnson to maintain the set oven temperature. The
"PREHEAT" light will glow when the oven isfirst set to operate, or if the
desired temperature isreset higherthan the actual oven temperature.
The "LOCK" light will flash until the d0or iocks when the self-clean
cycleisin use. It glows constantly after the door locks.
/
TIMER PAD -- Usedto set
or cancel the minute timer.
The minute timer does not
start orstop cooking.
program a
delayed bake
cycle (if
equipped).
The oven can be programmed to: BAKE normally, TIME BAKE, BROIL, SELF-CLEAN
I Note: The oven function wilt not work if the time of day clock is not set. " I
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Pushand hold STOP TIME pad _. After 7 seconds, the control will beep once. This will block the controls
r"_
from sounding when a pad ispushed. To return the sound, push and hold STOPTIME pad _ again for 7 seconds until 1
beep is heard.
The electronic oven control is set to operate in °F(Fahrenheit) when shipped from the factory.
The oven can be programmed for any temperature from 170°Fto 550°F (65°C to 287°C).
To change the temperature to °C (celsius) or from °C to °F (control should not be in a
Bake or Clean mode):
1. Push BROIL pad t" "- - " appears in the display.
2. Push and hold the UP ARROW ,_, pad until "HI" appears in the display.
3. Push and hold BROIL pad t until °F or °C appears in the display.
4. Push UP/_. or DOWN ARROW v pad to change °F to °C or °C to °F.
5. Pushany function pad to return to normal operating mode.
Temperature
Conversion
_Fahrenheit / Celsius)
9
Loading ...
Loading ...
Loading ...