Loading ...
Loading ...
Loading ...
General
Cleaning
FEATURE
OVERVIEW
• Cleaning
Recommendations
for Ceramic Glass
Cooktops (cont'd)
l_r_"_ Do not
use cleaners on a
heated surface. Fumes
could be hazardous.
Wait for area to cool
before cleaning. Do not
use cleaner cream to
clean porcelain, paint or
aluminum because it
can damage the
surface.
Do not use the following on the ceramic glass
cooktop:
• Do not use abrasive cleaners and scouring pads, such
as metal and some nylon pads. They may scratch the
cooktop, making it more difficult to clean.
• Do not use harsh cleaners, such as chlorine bleach,
ammonia or oven cleaners, as they may etch or dis-
color the cooktop.
• Do not use dirty sponges, cloths or paper towels, as
they can leave soil or lint on the cooktop which can
burn and cause discoloration.
00
Special Caution for Aluminum Foil and Aluminum Cooking Utensils
1) Aluminum foil
Useof aluminum foil will damage the cooktop. Do not use under any circumstances.
2) Aluminum utensils
The melting point of aluminum being much lower than that of other metals, care must be
taken when aluminum pots or pans are used. If allowed to boil dry, not only will the utensil
be,ruined, but also permanent damage in the form of breakage, fusing or marking may affect
the ceramic glass surface.
To Clean the Burner Grates, Contoured Burner, Pans, Burner Caps, and
Burner Bases
The burner grates, contoured burner pans, burner cap, and burner base should be routinely
cleaned. Keeping the burner ports clean will prevent improperJ ignition and an uneven flame.
Follow instructions below.
To Clean the Contoured Burner Pans
The square burner pans are attached to the cooktop and are not removable.The burner pan
forms a recessedwell area located around each burner unit. If a spill occursin one of the four
well areas, blot up spill with an absorbentcloth. Rinsewith a clean, damp cloth and Wipe dry.
To Clean the Grat_s
Any remaining soil may be removed by gently scouring with a soapy scoudng pad. Rinsewith a
I :I solution of clean water and ammonia. Ifnecessa_ cover difficult spats with an ammonia-
soaked paper towel for 30 to 40 minutes. Rinsewith clean water and a damp cloth, then scrub
with a soap-filled scouring pad. Rinseand wipe dry with a clean cloth. Remove all cleaners
thoroughIyor the grate porcelain may become damaged during future heating. DO NOT use
spray oven _:leaners.
To Clean the Burner Caps
Use a soap-filled scouring pad or a mild abrasive cleanser to clean burner caps. If necessary,
cover stubborn spots with an ammonia-soaked paper towel for 30 minutes. Rubgently with a
soap-filled scouring pad and rinse with a mixture of clean water and vinegar. Wipe dry. Remove
all cleaners thoroughly or the burner cap porcelain may become damaged during future heating.
To Clean the Burner Basesand Gas Openings
The ports (or slots) around the burner base must be routinely cleaned. Use a small-gauge wire or
needle to clean small slots or holes.Usecare to prevent damage to the electrode. If a cleaning
cloth should catch the electrode, it could break or damage the electrode. If the electrode is
damaged or broken, the surface burner will not light becauseitwill not st0ark. Manual lighting
with a match isstill possible.
Forproperflow of gasand ignition of the burner--DO NOT ALLOW SPILLS,FOOD,CLEANING
AGENTS ORANY OTHERMATERIALTO ENTERTHE GAS OPENING. Gas must flow freely
through the small hole inthe brassorifice for the burnersto light properly.Ifthe gas opening
orifice becomessoiled or clogged, usea small-gauge wire or needle to clean. ALWAYSkeep the
burner cap assemblyand ring in placewhenever a surface burner isin use.
After cleaning make sureeach burner cap is properlyaligned and level. Turn the burner on to
determine if it will light. If the burner does not light after cleaning, contact a SearsService
Center. Do not servicethe sealed burner yourself.
24
Loading ...
Loading ...
Loading ...