Loading ...
Loading ...
Loading ...
Surface
Cooking
FEATURE OVERVIEW
• PlacementofBurner
Grates
• Setting Surface Controls
Placement of Burner Grates
Placegrate over burner pans. Make _ure that the groove under grate fits over the raised lip of
the burner pan. The rounded corners of the grates should be placed toward the front of the
cooktop for the front burners and the rear of the cooktop for the back burners.
Burner Pan Lip
Cooktop Surface
Setting Surface Controls
Your cooktop may be equipped with any combination of the following burners:
Simmer Burner; this burner is best used for simmering delicate sauces, etc.
,Staffdard Burner; can be used for most all surface cooking needs.
Large Burner; the larger burner isbest usedwhen bringing large quantities of liquid to temperature
and when preparing larger quantities of food.
Regardless of size, always select a utensil that issuitable for the amount and type of food being
prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend
beyond the outer edge of the pan.
Your cool_,op isalsoequipped with 270 ° rotation valves. These valvesprovide enhanced control of
the burner flame. Eachburner lights automatically from an electric ignitor when its control knob is
turned to the LITE position.
Do not place plastic items such as salt and pepper shakers, spoon holders
or plastic wrappings on top of the cool(top when it isin use.These itemscould melt orignite.
Potholders, towels or wood spoons could catch fire if placed too close to a flame.
NOTE: White glasssurface
can appear green when it is
hot, which is normal, and it
will come back to white
when it cools down.
To operate the surface burner:
1. Placecooking utensilon burner.
2. Push in and turn the Surface Control knob to LITE. Note: All electronic ignitorswillclickatthe
same time. However, onlythe burner you are turning on will ignite.
3. Visuall_ check that the burner has lit.
4. Push in and turn the Surface Control Knob to the desiredflamesiz'e.The control knobs do not
have to be set at a particular mark. Usethe guidesand adjustthe flame asneeded. DO NOT
cookwith the Surface Control knob inthe LITEposition. (Theelectronic ignitor willcontinue to
click if left in the LITE position, causing premature wear.)
Inthe eventofan electricalpower outage, the surface burnerscan belit manually. To lightasurface
burner, hold a lit match to the burnerhead, then slowly turnthe Surface Control knob to LITE.Use
caution when lighting surfaceburnersmanually.
12
Loading ...
Loading ...
Loading ...