Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
23
Risk of injury caused by a
damaged microwave oven.
Damage to the microwave oven can
compromise your safety.
Check the microwave oven for visible
signs of damage. Do not use a
damaged microwave oven.
The microwave oven is supplied with a
plug for connection to a dedicated line
and junction box.
Install the microwave oven so that the
outlet is accessible. If the outlet is not
accessible, make sure that a suitable
means of disconnection is provided on
site for each pole.
Risk of fire by overheating.
Installing the appliance with a power
bar or an extension cord can
overload the cords.
Do not use power bars and
extension cords to connect the
microwave oven to the power supply.
If the power cord is damaged, it must
be replaced with a special power cord
of the same type (available from Miele).
For safety reasons, the power cord
must only be replaced by a Miele
authorized technician.
The max. rated load and the fuse
protection can be found in these
operating and installation instructions or
on the data plate. Compare this with the
data of the domestic electrical supply.
If in any doubt, consult a qualified
electrician.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronized with the grid power
supply (e.g., island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronized with
the grid power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the
current version of VDE-AR-E 2510-2.
Do not connect the appliance to energy
saving plugs or outlets. The reduction
of power to the appliance caused by
these devices will cause the appliance
to run hot and may damage it and/or
shorten its usable life.
Electrical connection
The microwave oven is equipped with a
7ft. (2.1m) long power cord with a
NEMA 5-15P molded plug for
connection to a 120V, 15A, 60Hz
power supply.
KEEP THE OPERATING AND
INSTALLATION INSTRUCTIONS IN A
SAFE PLACE.
Loading ...
Loading ...
Loading ...