Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Serf-CleanCycle(cont.)
The Self-Clean Cycle, including
cooldown time, is automatically set for
4 hours 20 minutes and automatically
turns off after the set time, but you
may change this from 3 hours if oven
is lightly soiled, up to 5 hours if oven
is heavily soiled.
1. Touch the CLEAN pad.
4 hours 20 minutes will
show in the display.
(_ 2. If you want to change
the length of clean time
(_ touch the HOUR/MINUP or DOWN arrow
pads.
ST_T_ 3. Touch the START pad.
Touch the CLEAR/OFF pad. You will
need to wait for the oven temperature
to drop below the lock temperature
(approx. 1 hour) before attempting to
open the door.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them with
a soap-filled steel-wool pad. Be sure
to rinse thoroughly. These are usually
deposits of salt that cannot be
removed during the cycle.
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle,
The door locks automatically. The
display will show the clean time
remaining. It will not be possible to
open the oven door until the _ 1.
temperature drops below the lock
temperature and the LOCKED DOOR
light goes off. (_ 2.
When the LOCKED DOOR light is off,
open the door.
The words LOCK DOOR will flash and
the oven control will signal if you set
the clean cycle and forget to close the _ 3.
oven door.
@ 4.
@
Make sure the clock is set correctly.
Touch the CLEAN pad.
If you want to change
the length of clean time
touch the HOUR/MIN
UP or DOWN arrow
pads.
Touch the DELAY
START pad.
Touch the HOUR/MIN
UP or DOWN arrow
pads to set the time you
prefer the clean cycle
to start.
Touch the START pad.
35
Loading ...
Loading ...
Loading ...