Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Self-CleaningCycle
,
2_
Remove the broiler pan and grid,
oven racks, utensils, and any foil
that may be in the oven
Soil on the front frame and
outside the gasket on the door
liner will need to be cleaned
by hand
A
Front
Frame
L
,__" Door Gasket
_-_" Door Liner "_"_ \"
Clean these areas with hot water,
soap-filled steel-wool pads, or
cleansers such as Soft Scrub ® to
remove any soil Rinse well with clean
water and dry
3. Wipe up any heavy spitlovers on
the oven bottom
4_
Do not clean the gasket The
fiberglass material of the oven
door gasket cannot withstand
abrasion tt is essential for the
gasket to remain intact If you
notice it becoming worn or frayed,
it should be replaced
The gasket is designed to have a
5_-6 ' gap at the bottom of the door
This allows for proper air circulalion
Door Panel Gasket
Door Liner
It is normal for your oven door to give
the appearance of not having a good
seal against the range This is due to
the gasket The location of the gasket
on the door maintains a good seal
and prevents any heat loss
--_ tensils should never be
left in the oven during a
self-clean cycle.
The oven racks may be
cleaned during the self-clean
cycle, but will lose their luster
and become hard to slide. If you
choose to leave them in during
the cycle, wiping them down with
vegetable oil after the cycle will
help them slide easier.
For the first clean cycle, vent the
room with an opened window or
hood vent. This will reduce the
odor produced when heating
new parts.
23
Loading ...
Loading ...
Loading ...