Loading ...
Loading ...
Loading ...
USER MAINTENANCE INSTRUCTIONS
38
www.insigniaproducts.com
Understanding the error codes
Your washer has an automatic error-monitoring system to detect and diagnose
problems at an early stage.
Notes:
• = Off, = Flashing, = On
• While an error is happening, the Extra Rinse LED flashes and the Status LEDs
indicates the error code.
• When an error is happening, the buzzer beeps for 5 seconds and repeat once
per 15 minutes. After 24 hours, your washer powers off automatically.
ERROR
CODE
LED DISPLAY POSSIBLE CAUSE SOLUTIONS
E1
Your washer takes
more than 30 minutes
to fill with water. After
water finishes entering
your washer, the water
level hasn’t changed in
five minutes.
• Make sure that the lid
isn’t open.
• Make sure that water
isn’t leaking. See No
water or not enough
water on page 36.
•Contact Insignia
Customer Care.
E2
Your washer takes
more than 10 minutes
to drain.
• See Washer doesn’t
drain or spin on
page 36.
E3
The lid is open. • Close the lid.
• The lid lock or PCB has
failed. Contact Insignia
Customer Care.
Your washer is not
level
• Level your washer. See
Step 4: Level your
washer on page 27.
E4
Your washer is out of
balance more than
three times in spin
operation.
•Contact Insignia
Customer Care.
F2
The EEPROM failed. • Contact Insignia
Customer Care.
F5
Load sensing failed. • Contact Insignia
Customer Care.
Status LEDs
Loading ...
Loading ...
Loading ...