Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
20
www.insigniaproducts.com
Installing your washer
You will need:
Step 1: Select a location
Before you install your washer, make sure that the location:
• Is a hard, level surface without carpeting or soft flooring that can obstruct
ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Isn’t exposed to freezing temperatures (32° F or 0° C).
• Is away from heat sources such as oil or gas.
• Has enough space so that your washer doesn’t rest on its power cord.
See Choosing a proper location
on page 9.
Step 2: Connect the water hoses
1 Before connecting the water-inlet hose to the tap, remove the rubber washer
inside the water-inlet hose connector. Take the rubber washer with filter out of
the accessory bag and install it into the water-inlet hose connector.
Note: The water supply hoses aren’t supplied with your washer and must be
purchased separately.
CAUTIONS:
• Use new water supply hoses. Using old hoses can result in leakage or overflow
that can damage your property.
• Don’t connect multiple water supply hoses together to increase the length of
the hose. Hoses connected this way can leak and cause electrical shock. If a
hose is too short, replace the hose with a longer, high-pressure hose.
Pliers
Phillips screwdriver
Level
Flat-head screwdriver
Wrench
Washer inlet hoses
Rubber washer
Inlet hose
Hose filter
Loading ...
Loading ...
Loading ...