Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
24
www.insigniaproducts.com
5 Tighten the fittings by hand until they are snug, then tighten them an
additional two-thirds of a turn with pliers or a wrench.
6 Turn on the hot and cold water supplies, then check all the water supply
intake connections and the faucets for water leaks.
7 Fasten the drain hose to the washer frame at the indicated locations with the
provided hose clamps (2), using a Phillips screwdriver.
8 Position the other end of the drain hose (the loose end) in one of the following
ways:
CAUTIONS:
• Don’t overtighten the fittings or apply tape or sealant to the faucets or water
supply intakes. This can damage the fittings.
• Make sure that the water supply hoses aren’t twisted or bent. A bent or
twisted hose can leak and cause an electric shock because of water leakage.
To ensure the correct water usage, connect both hot and cold water faucets.
If either or both aren’t connected, an error code could occur.
CAUTION:
Make sure that the connection between the drain hose and the wash basin,
standpipe, or laundry tub isn’t airtight.
Loading ...
Loading ...
Loading ...