Genie 2033-TKV 1/2 HP Wi-Fi Chain Drive Glide Connect Garage Door Opener

Operation & Maintenance Manual - Page 17

For 2033-TKV.

PDF File Manual, 32 pages, Read Online | Download pdf file

2033-TKV photo
Loading ...
Loading ...
Loading ...
15
Force Settings:
Force settings are pre-programmed at the factory and applied
during the Open/Closed Limit settings steps.
For normal use, these settings should not need adjustment.
Conditions possibly requiring adjustments are:
1. Doors with very sti weather seals.
2. Doors that start down, STOP, and reverse before closing.
3. Doors that start up, but STOP before they completely open.
AVERTISSEMENT
!
Pour éviter les blessures ou des dommages
• NE JAMAIS régler la force pour compenser des
dommages, y compris une porte mal équilibrée, un
rail de porte coinçant ou des ressorts cassés.
• Tous les mois, EFFECTUEZ LE TEST D’INVERSION AU
CONTACT.
WARNING
!
TO AVOID INJURY OR DAMAGE
• NEVER adjust the force settings to adjust for damage,
including an unbalanced door, binding door track or
broken spring.
• Perform a CONTACT REVERSE TEST monthly.
1. Pressandhold both UP & DOWN arrow buttons until the
ROUND LED turns RED. Release buttons.
• LEDs will show current force level. SEE CHART.
2. Press either the UP or DOWN arrow button until the
desired UP force setting is shown. SEE CHART.
3. Press the PRGM button to lock the desired UP FORCE
setting.
• LEDs will now show the current DOWN FORCE setting.
SEE CHART.
4. Press either the UP or DOWN arrow button until desired
DOWN force setting is shown. SEE CHART.
5. Press the PRGM button to lock the desired DOWN FORCE
setting.
• Both LEDs will turn BLUE then go out conrming that the
force settings have been changed and are locked.
6. Opener is now ready to operate and test.
7. Operate door from the wall console two full cycles then
perform safety contact reverse test.
Flashing RED
PRESS & RELEASE
See Chart for
Force level
indicators.
Press PRGM to
lock settings
FORCE SETTING CHART
Force Level Long LED Round LED
1 (LOWEST) OFF BLUE
2 BLUE OFF
3 BLUE BLUE
4 OFF VIOLET
5 VIOLET OFF
6 VIOLET VIOLET
7 OFF RED
8 RED OFF
9 (HIGHEST) RED RED
Force Setting Guide:
SPECIAL INSTALLATION INFORMATION
4
Loading ...
Loading ...
Loading ...