Loading ...
Loading ...
Loading ...
45
9. Error Messages and Troubleshooting
appears
or
the monitor is turned
off unexpectedly
during a
measurement.
Batteries are depleted.
Immediately replace all 4 batteries with new ones.
Refer to sub-section 2.1.
Nothing appears on
the BP reading
display of the
monitor.
Batteries are depleted.
Battery polarities are not properly aligned.
Check the battery installation for proper placement.
Refer to sub-section 2.1.
Blood pressure
readings appear too
high or too low.
Blood pressure varies constantly. Many factors including stress, time of day, and/or how you apply the arm cuff,
may affect your blood pressure.
Review sub-sections 2.3, 3.1 and 3.2.
Any other problems
occur.
Press the BP [START/STOP] button to turn the monitor off, then press it again to take a blood pressure
measurement. If the problem continues, remove all batteries and wait for 30 seconds. Then, reinstall batteries.
If the problem still persists, contact customer service.
Refer to section 14.
BP reading display /
Problem
Possible Cause Solution
Loading ...
Loading ...
Loading ...