Loading ...
Loading ...
Loading ...
34
4. Taking Only a Blood Pressure Measurement
4. Remain still and do not talk until the entire measurement process is
complete.
1) The “ ” symbol flashes at every heartbeat.
2) After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates.
Your blood pressure and pulse rate are displayed on the monitor.
Note
• If your monitor has not been paired with your smartphone, skip following steps 3) and 4).
3) As soon as your measurement is complete, open the “OMRON connect US/CAN” app on your smartphone to
transfer your readings.
Note
• On the paired smartphone, Bluetooth must be enabled.
• If you need to transfer the readings manually, refer to section 7.
4) You can view your blood pressure readings on the app.
5. Remove the arm cuff.
6. Press the BP [START/STOP] button to turn your monitor off.
Note
• Your monitor will automatically turn off after 2 minutes.
• Wait 2-3 minutes between blood pressure measurements. The wait time allows the arteries to decompress and return to their
premeasurement state. You may need to increase the wait time depending on your individual physiological characteristics.
• Your monitor stores up to 90 blood pressure readings in the internal memory, but the previous readings cannot be viewed on the
monitor.
• If your systolic blood pressure is more than 210 mmHg, take a blood pressure measurement manually. Refer to section 7.
Loading ...
Loading ...
Loading ...