Loading ...
Loading ...
Loading ...
5TOOLS
TOOLS REQUIRED
You will need the following tools to assemble your barbecue�
10mm Spanner (wrench) all body nuts
19mm Spanner (wrench) for gas inlet connection
Phillips Head Screwdriver
NOTE: Always use the correct size spanner (wrench) to
tighten gas fittings� Ensure that all gas fittings are spanner
tightened and then leak tested before continuing with
operation of the appliance�
FIG 4
IMPORTANT!
Always check the gas label on the appliance to ensure that
you have the correct gas configuration.
FIG 5
For Your Safety
If you smell gas:
1� Shut off gas to the appliance�
2� Extinguish any open flame�
3� Open lid�
4� If odour continues, immediately call your gas supplier or
your fire department�
For Your Safety
1� Do not store or use gasoline or other flammable vapours
or liquids in the vicinity of this or any other appliance�
2� An LPG cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance�
IMPORTANT!
• The cylinder supply system must be arranged for
vapour withdrawal. This normally means the cylinder
must be upright.
• Do not store a spare LP-gas cylinder under or near
this appliance.
• Never fill the cylinder beyond 80% full.
If these directions are not followed exactly, a fire causing
death or serious injury may occur.
Loading ...
Loading ...
Loading ...